The purpose designed SkyPod aluminium roof lantern system is discreet yet stylish. Designed with less rafters than the traditional roof lantern to allow more light to flood into your home and creating a more modern look. Bringing natural light into the home all year round, the high-performance, high quality Aliver Rooflight system is a fixed, flat solution which creates a contemporary look for any property.
Manufacturers of the Smart Visofold 1000 aluminium bi-folding doors. The system we manufacture is (smart architectural aluminium) it is one of the most recognised systems on the market by architects.
Manufacturers of the Smart Visofold 1000 aluminium bi-folding doors. The system we manufacture is (smart architectural aluminium) it is one of the most recognised systems on the market by architects.
Services
The average cost of an aluminium bi-folding door is 650 including VAT per sash and this is a supply only price and is subject to a delivery charge depending on area and installation charge if required.
Our aluminium bi-folding doors come in a range of colours so many to choose from you will be spoilt for choice.
We can manufacture aluminium bi-folding doors with a range of different thresholds to suit your requirements.
We install aluminium bi-folding doors nationwide we also install roof lanterns nationwide if we are installing a bi-folding door at the same time if all you require is a roof lantern we only do them supply only however they are very easy to install and anyone can do it.
Our aluminium bi-folding doors come in a range of colours so many to choose from you will be spoilt for choice.
We can manufacture aluminium bi-folding doors with a range of different thresholds to suit your requirements.
We install aluminium bi-folding doors nationwide we also install roof lanterns nationwide if we are installing a bi-folding door at the same time if all you require is a roof lantern we only do them supply only however they are very easy to install and anyone can do it.
Our full product range is available on a supply only, or supply and fit basis as required.
To see some of the installations we've completed for happy customers across the country take a look at our case studies page.
You'll see projects ranging from bi-folding doors in London, to roof lanterns in Hull and new conservatory roofs in Manchester.
Our reputation has grown out of Driffield, East Yorkshire, and extended across the whole of Yorkshire as our name became recognised in larger cities such as Doncaster, York, Sheffield and Leeds.
To see some of the installations we've completed for happy customers across the country take a look at our case studies page.
You'll see projects ranging from bi-folding doors in London, to roof lanterns in Hull and new conservatory roofs in Manchester.
Our reputation has grown out of Driffield, East Yorkshire, and extended across the whole of Yorkshire as our name became recognised in larger cities such as Doncaster, York, Sheffield and Leeds.
Set out the timbers on the flat roof leaving a hole where the roof lantern will be fitted and allowing enough room for spotlights if required.
Screw a timber down around the hole Approx 100mm high and 70 mm wide making sure the size of the hole does not change.
Measure the timber to timber hole and deduct 30 mm from the length and width this will make the roof lantern overhang inside 15 mm all the way around to allow room for plaster work (see diagram).
If the hole has already been done and plastered then you would measure plaster to plaster and no deduction is made.
Screw a timber down around the hole Approx 100mm high and 70 mm wide making sure the size of the hole does not change.
Measure the timber to timber hole and deduct 30 mm from the length and width this will make the roof lantern overhang inside 15 mm all the way around to allow room for plaster work (see diagram).
If the hole has already been done and plastered then you would measure plaster to plaster and no deduction is made.
Screw on the brackets as shown with the self drilling screws provided, then place the plastic parts in the main beam as shown.
Follow the roof drawing provided and bolt the rafters to the ridge at both ends on both sides using the nuts provided with a 13mm spanner.
Carry the ridge to the main beam as shown and place in the correct holes, an extra pair of hands helps.
Place the corner rafter into the correct hole on the aluminium half moon on the end of the ridge.
Now bolt on the remainig rafter in the middle of the two corner rafters, if your roof lantern has one.
Follow the roof drawing provided and bolt the rafters to the ridge at both ends on both sides using the nuts provided with a 13mm spanner.
Carry the ridge to the main beam as shown and place in the correct holes, an extra pair of hands helps.
Place the corner rafter into the correct hole on the aluminium half moon on the end of the ridge.
Now bolt on the remainig rafter in the middle of the two corner rafters, if your roof lantern has one.
Set out the timbers on the flat roof leaving a hole where the roof lantern will be fitted and allowing enough room for spotlights if required.
Screw a timber down around the hole approx 75mm wide and 150mm high making sure the size of the hole does not change.
Simply give us the external size of the up-stand and we will make the deductions to ensure it fits correctly.
If you wish to order the lantern before the up-stand is done, all you have to do is give us the external dimensions of the timber up-stand you are planning to do and make sure it is done to the sizes you have given us.
Screw a timber down around the hole approx 75mm wide and 150mm high making sure the size of the hole does not change.
Simply give us the external size of the up-stand and we will make the deductions to ensure it fits correctly.
If you wish to order the lantern before the up-stand is done, all you have to do is give us the external dimensions of the timber up-stand you are planning to do and make sure it is done to the sizes you have given us.
Reviews
Be the first to review C R C.
Write a Review